GPD-COB-12mm-600D-24V-24W
Product Overview
1.Equipped with 600 LED chips arranged linearly with integrated packaging. It features a wide luminous surface, uniform light color and zero light spots.
2.Adopts high thermal conductivity flexible printed circuit (FPC), which can be bent freely for easy installation.
3.LED chips are directly mounted on the FPC, achieving a full 180° beam angle.
4.Designed with DC24V constant voltage. Featuring safe low voltage and low voltage drop, it supports a standard cascading length of 5 meters.
5.Pre-laminated high-adhesion thermally conductive double-sided adhesive tape enables easy installation with firm and long-lasting adhesion.
6.This LED light source is energy-saving and environmentally friendly, and complies with RoHS environmental standards.
Precautions for Product Installation & Usage
(A)Avoid contact between sharp objects and the LED strip surface during installation. Damaged encapsulant will result in product failures.
(B) Keep the encapsulant on the luminous area away from high-temperature objects to prevent scorching the encapsulant and degrading linear lighting performance.
(C) Use a DC 24V regulated power supply for driving. Select a power supply with matched rated power according to the total length of LED strips to be installed. The total power consumption of LED strips powered by a single power supply shall not exceed 80% of the power supply’s rated power.
(D) Do not sharply fold or twist the LED strip, otherwise the rubber casing may be damaged and the internal electrical structure of LED chips may be destroyed.
(E) The recommended bending diameter of the LED strip in any bending application must be greater than 1 cm.
(F) Protect the product against water and moisture intrusion.
Shenzhen Guangpuda Technology Co., Ltd. reserves the right of final interpretation for this specification sheet.
GPD-COB-30mm-1600D-24V-40W-CV
Product Overview
1.This strip adopts 1600 flip-chip LEDs arranged in a linear layout with integrated packaging, delivering uniform light output and color without visible light spots.
2.Designed with high thermal conductivity flexible circuit boards, the light strip supports free bending for easy installation.
3.LED chips are directly mounted onto the FPCB substrate, achieving a wide beam angle of up to 170°.
4.Featured with DC24V constant voltage power supply, this low-voltage solution guarantees safe usage and low voltage drop, with a standard cascading length of 5 meters.
5.Pre-attached high-adhesion thermally conductive double-sided adhesive tape facilitates quick installation and ensures firm, long-term adhesion.
6.The LED light source is energy-saving and eco-friendly, compliant with RoHS environmental directives.
Precautions for Installation and Operation
(A) Prevent sharp objects from scraping the strip surface during installation. Damaged encapsulant will lead to product malfunction.
(B) Keep the encapsulant of the luminous area away from high-temperature articles to avoid scorching the colloid and degrading the linear lighting performance.
(C) Power the strip with a regulated DC 24V power supply. Select a power supply with matching rated power according to the total length of LED strips to be installed. The total power consumption of strips driven by a single power supply shall not exceed 80% of the power supply’s rated power.
(D) If sealant is required for installation, acid-curing silicone sealant is strictly prohibited. Acid substances will corrode the circuit board, outer silicone layer and phosphor powder. Only neutral sealants (dealcohol type and deketoxime type) are permitted for use.
(E) Do not sharply bend or twist the LED strip at a small radius. Improper bending may damage the outer rubber layer and break the internal electrical structure of LED chips.
(F) The bending diameter of the LED strip must be larger than 1 cm. Waterproof and moistureproof protection should be implemented during application.
Shenzhen Guangpuda Technology Co., Ltd. reserves the right of final interpretation for this specification sheet.
GPD-COB-8mm-384-24V-10W-CV
Product Overview
1.Equipped with 384 flip-chip LEDs arranged in linear layout with integrated packaging, delivering uniform light color with no light spots.
2.Adopts high thermal conductivity flexible circuit board structure; the strip can be bent freely for easy installation.
3.LED chips are directly mounted on the FPCB, offering a wide beam angle up to 170°.
4.DC 24V constant voltage design features safe low voltage and low voltage drop, supporting a standard cascading length of 5 meters.
5.Pre-attached high-adhesion thermal conductive double-sided adhesive tape enables simple installation with firm and long-lasting adhesion.
6.Eco-friendly LED light source complies with RoHS environmental standards.
Precautions for Product Installation & Usage
(A) Do not scratch the surface of the LED strip with sharp objects during installation. Damaged gel coating will lead to product failure.
(B) Keep the luminous gel area away from high-temperature objects to prevent gel scorching and deterioration of linear lighting performance.
(C) Use a regulated DC 24V power supply for driving. Select a power supply with matched rated power according to the total length of installed strips. The total power load of LED strips driven by one power supply shall not exceed 80% of the power supply’s rated power.
(D) If glass adhesive is required for installation, acid-cure silicone sealant is strictly forbidden. Acid substances will corrode the circuit board, silicone layer and phosphor powder. Only neutral glass adhesives (dealcohol type & deketoxime type) are acceptable.
(E) Do not sharply bend or twist the LED strip in a small radius, which may damage the rubber casing and destroy the internal electrical structure of LED chips.
(F) The bending diameter of the LED strip shall be larger than 1 cm. Waterproof and moisture-proof protection is required during application.
Shenzhen Guangpuda Technology Co., Ltd reserves the right of final interpretation for this specification sheet.