Introduction:

H807SA has 8 outputs, supports maximum 8196 pixels, it Support Art-Net protocol and can work with DMX console or set address for DMX chips .H807SA also can add or delete DAT files through the LAN.

Instructions：

1. SD card needs to be formatted into FAT32 or FAT16 format after adding and deleting files many times. Support SDHC (High Capacity SD card), up to 64g bytes. Up to 64 DAT files are allowed in the SD card, and the playback order is sorted alphabetically according to the file name.
2. Eight output ports to control up to 8192 pixels. The maximum number of control points per port is 1024. It can also be set as one, two or four output ports. Each port can control 2048 points at most, and the remaining ports can be used as a backup of the used ports. Actually, the maximum output of each port is 1600 points, a total of 12800 points.                      Qed3110 chip can only select eight port output, and d986x can only select eight port or one port output.                                                                                                                                              Tm1812 and simultaneous sequence chip support 16 ports. Select 16 lines and one sub control in the computer software, and each port can output 800 points at most. Ports 1-8 are output by DAT and ports 9-16 are output by CLK. This function works online, offline and artnet.

3. When powered on, the first line of LCD displays the controller model, and the second line displays the version number. Press and hold the “menu” key before power on, and the controller will automatically upgrade the firmware.
4. Press menu key to switch menu, press’ – ‘or’ + ‘key to set, long press’ -‘ or ‘+’ key to accelerate parameter setting, press OK key to save parameters or enter submenu.
5. Set the password. In the light modeling window of LED programming software, click the menu “setting” — “controller password” to pop up the encryption dialog box. Select the controller encryption. The encryption method is to limit the number of power on. After the first encryption, the second encryption can be performed without decryption to prolong the use times.