COB LED Strip 8mm 480LEDs/m DC12V 11W/m – GPD-COB-8mm-480D-12V-11W-CV
Product Overview
1.480 flip-chip LED chips are arranged linearly with integrated packaging, delivering uniform light output and color without light spots.
2.It adopts a high thermal conductivity flexible circuit board design, which can be bent freely for easy installation.
3.LED chips are directly mounted on the FPCB, achieving a wide beam angle of up to 180°.
4.Featuring a DC 12V constant-voltage design with safe low voltage and low voltage drop; the standard cascading length is 5 meters.
5.High-adhesion thermal conductive double-sided adhesive tape is pre-applied on the back, enabling quick installation with firm and long-lasting adhesion.
6.This LED light source is energy-saving and environmentally friendly, and complies with RoHS environmental protection standards.
Notes on Product Installation and Usage
(A) During installation, avoid touching the surface of the LED strip with sharp objects, so as not to damage the encapsulating gel and cause product failures.
(B) Prevent the gel on the light-emitting area from contacting high-temperature objects, which may scorch the gel and degrade the linear lighting performance.
(C) Use a DC 12V regulated power supply for driving. Select a power supply with proper rated power according to the quantity of LED strips to be installed. The total power of all strips powered by one power supply shall be less than 80% of the power supply’s rated power.
(D) If sealant is required for installation, acid-curing silicone sealant is strictly forbidden (acid substances will corrode the circuit board, silicone encapsulation and phosphor powder). Only neutral sealant (dealcoholization type and deketoxime type) is permitted.
(E) Do not sharply bend or twist the LED strip at a tight radius, otherwise the silicone strip may be damaged or the internal electrical structure of the LED chips may be destroyed.
(F) It is recommended that the bending diameter of the LED strip at any position shall be greater than 1 cm. Keep the product away from water and moisture.
The right of final interpretation of this specification belongs to Shenzhen Guangpuda Technology Co., Ltd.
COB LED Strip 8mm 480LEDs/m DC24V 11W/m – GPD-COB-8mm-480D-24V-11W-CV
Product Overview
1.480 flip-chip LED chips are arranged in a linear layout with integrated packaging, delivering uniform light color without light spots.
2.It adopts a high thermal conductivity flexible circuit board design, which can be bent freely for easy installation.
3.LED chips are directly mounted on the FPCB, achieving a beam angle up to 170°.
4.It features a DC 24V constant-voltage design with safe low voltage and low voltage drop; the standard cascading length is 5 meters.
5.High-adhesion thermal conductive double-sided adhesive tape is pre-applied on the back for easy installation with firm and long-lasting adhesion.
6.This LED light source is energy-saving and eco-friendly, complying with RoHS environmental standards.
Notes on Product Installation and Usage
(A)During installation, avoid sharp objects touching the surface of the LED strip, so as not to damage the encapsulation gel and cause product defects.
(B)Keep the gel of the light-emitting area away from high-temperature objects, which may scorch the gel and impair the linear lighting performance.
(C)Use a DC 24V regulated power supply for power supply. Select a power supply with proper power rating according to the quantity of LED strips to be installed. The total power consumption of all strips connected to one power supply shall not exceed 80% of the power supply’s rated power.
(D)If sealant is required during installation, acid-curing silicone sealant is strictly prohibited (acidic substances will corrode the circuit board, silicone encapsulation and phosphor powder). Only neutral sealant (dealcoholization type and deketoxime type) can be used.
(E)Do not bend or twist the LED strip sharply at a small radius, otherwise the silicone strip may be damaged or the internal electrical structure of the LED chips may be destroyed.
(F) It is recommended that the bending diameter of the LED strip at any position be greater than 1 cm. Please protect the product against water and moisture.
The right of final interpretation of this specification belongs to Shenzhen Guangpuda Technology Co., Ltd.
COB LED Strip 8mm 528LEDs/m DC12V 13W/m – GPD-COB-8mm-528D-12V-13W-CV
Product Overview
1.528 chips are arranged linearly with integrated packaging, providing uniform light output with no visible light spots.
2.Adopts high thermal conductivity flexible printed circuit (FPC) board design. The strip can be bent freely for easy installation.
3.LED chips are surface-mounted directly on the FPC substrate, achieving a 180-degree beam angle.
4.DC12V constant voltage design features safe low voltage and low voltage drop, with a standard cascading length of 5 meters.
5.High-adhesion thermally conductive double-sided adhesive is attached to the backside, enabling effortless installation with firm and long-lasting adhesion.
6.This LED light source is energy-saving and eco-friendly, in compliance with RoHS environmental standards.
Precautions for Product Installation & Application
(A)Do not allow sharp objects to contact the light strip surface during installation. Damages to the encapsulant will result in product failure.
(B)Keep the encapsulant of the luminous area away from high-temperature objects to prevent scorching of the encapsulant and deterioration of linear lighting performance.
(C)Use a DC12V regulated power supply for driving. Select a power supply with appropriate rated power according to the total length of light strips to be installed. (D)The total power consumption of light strips driven by a single power supply shall not exceed 80% of the rated power of the power supply.
(E)If glass sealant is required during installation, acid-curing silicone sealant is strictly prohibited. Acidic substances will corrode the circuit board, silicone layer and phosphor powder. Only neutral glass sealants (dealcohol type and deketoxime type) are allowed for use.
(F)Sharp bending or twisting of the light strip is forbidden, which may damage the adhesive layer and destroy the internal electrical structure of LED chips.
(G)The bending diameter of the light strip at any bending position is recommended to be greater than 1 cm. Please protect the product against water penetration and moisture.
Shenzhen Guangpuda Technology Co., Ltd reserves the final right of interpretation for these specifications. The actual delivered product shall prevail.
COB LED Strip 9.91mm 528LEDs/m DC12V 14W/m – GPD-COB-9.91mm-528D-12V-14W-CV
Product Overview
1.Equipped with 528 linearly arranged chips adopting integrated packaging technology, delivering even luminous color without light spots.
2.Designed with high thermal conductivity flexible printed circuit (FPC), the light strip supports free bending for easy field installation.
3.LED chips are directly mounted on the FPC substrate, achieving a wide 180° beam angle.
4.DC12V constant voltage design adopts safe low voltage with low voltage drop, and the standard cascading length is 5 meters.
5.High-adhesion thermally conductive double-sided adhesive is laminated on the back side, enabling convenient installation with stable and long-lasting bonding performance.
6.The LED light source features energy saving and environmental friendliness, fully compliant with RoHS environmental regulations.
Precautions for Product Installation and Usage
(A)Keep sharp objects away from the light strip surface during installation. Damages to the encapsulant will lead to product defects.
(B)Prevent the encapsulant on the luminous area from contacting high-temperature objects to avoid scorching the encapsulant and impairing the linear lighting effect.
(C)Use a DC 12V regulated power supply for power supply drive. Select a power supply with matched power rating according to the total length of light strips to be installed. The total power of light strips powered by a single power supply shall not exceed 80% of the power supply’s rated power.
(D)If glass adhesive is required for installation, acid-curing silicone sealant is strictly prohibited. Acid substances will corrode circuit boards, silicone layers and phosphor powder. Only neutral glass adhesives (dealcohol type and deketoxime type) are permitted.
(E)Acute bending or twisting of the light strip is forbidden, otherwise the rubber coating may be damaged and the internal electrical structure of chips may be destroyed.
(F)The bending diameter of the light strip at any bending position is recommended to be larger than 1 cm. Please keep the product away from water and damp environments.
Shenzhen Guangpuda Technology Co., Ltd reserves the final right of interpretation for these specifications. The actual delivered product shall prevail.
GPD2835-120D
Product Features
1.Plug-and-play without an adapter; it can be directly connected to 110V/230V mains power supply.
2.Flexible light body, freely bendable for unrestricted installation on corners and curved surfaces.
3.Adopts double injection molding process, sturdy and reliable with high product consistency.
GPD2835-120D
Product Features
1.Plug-and-play, no adapter needed; can be directly used with 110V/230V mains electricity.
2.Flexible strip body, bendable freely, with no restrictions on corner and curved surface installation.
3.The product adopts double injection molding technology, which is firm and durable with high product consistency.
GPD2835-120D
Product Features
1.Plug-and-play without an adapter; can be directly connected to 110V/230V mains power for operation.
2.Flexible light body, bendable freely to enable unrestricted installation on corners and curved surfaces.
3.Adopts double injection molding process, sturdy and reliable with consistent product quality.
GPD2835-144D
Product Features
1.Plug-and-play without an adapter; can be directly connected to 110V/230V mains electricity for use.
2.Flexible strip body, bendable freely to allow unlimited installation on corners and curved surfaces.
3.Adopts double injection molding process, sturdy and durable.
4.Equipped with custom-molded male and female connectors for flexible connection, featuring IP65 waterproof performance.
GPD2835-144D
Product Features
1.Plug-and-play without an adapter; can be directly connected to 110V/230V mains electricity for operation.
2.Flexible lamp body that can be bent freely, allowing unrestricted installation on corners and curved surfaces.
3.Adopts double injection molding technology, sturdy, reliable and with excellent product consistency.
4.Built with high-brightness LED chips, luminous efficiency exceeds 95LM/W, offering high cost performance.
GPD2835-152D
Product Features
1.Plug-and-play design, no adapter needed; directly compatible with 110V/230V mains power supply.
2.Flexible light body, freely bendable for unrestricted installation on corners and curved surfaces.
3.Manufactured via double injection molding process, sturdy, reliable and with high product consistency.
4.Adopts high-brightness LED chips with luminous efficiency over 95LM/W, featuring excellent cost performance.
GPD2835-180D
Product Features
1.Plug-and-play, no adapter needed; directly works with 110V/230V mains power supply.
2.Flexible light strip body, bendable freely for unrestricted installation on corners and curved surfaces.
3.Manufactured with double injection molding process, sturdy and solid.
4.Adopts custom private mold male & female plug connectors for flexible connection, with IP65 waterproof grade.
GPD2835-180D
Product Features
1.Plug-and-play without an adapter; it can be directly connected to 110V/230V mains power supply.
2.Flexible light body, freely bendable for unrestricted installation on corners and curved surfaces.
3.Adopts double injection molding process, sturdy and reliable with high product consistency.