GPD-COB-RGB-10mm-576D-24V-16W-CV
Product Overview
1.Equipped with 576 LED chips arranged in linear layout and integrated packaging, featuring even light color distribution with zero light spots.
2.Adopts high thermal conductivity flexible PCB design. The light strip can be bent freely for easy installation work.
3.LED chips are surface-mounted directly on the FPC substrate, delivering a wide beam angle up to 180°.
4.Designed with DC 24V constant voltage supply. This low-voltage solution ensures safe utilization and low voltage drop, with a standard cascading length of 5 meters.
5.Pre-laminated high-adhesion thermally conductive double-sided adhesive tape simplifies installation and provides firm, long-term adhesion.
6.The LED light source is energy-saving and environmentally friendly, complying with RoHS environmental regulations.
Precautions for Installation & Operation
(A)Do not scratch the surface of the LED strip with sharp objects during installation. Damaged encapsulant will result in product failure.
(B)Keep the encapsulant on the luminous area away from high-temperature objects to prevent scorching the colloid and impairing the linear luminous effect.
(C)Use a regulated DC 24V power supply for driving. Select a power supply with appropriate rated power according to the total length of LED strips to be installed. The total power of LED strips powered by a single power supply shall not exceed 80% of the power supply’s rated power.
(D)If glass sealant is required during installation, acid-curing silicone sealant is strictly prohibited. Acid substances will corrode the circuit board, outer silica gel and phosphor powder. Only neutral glass sealants (dealcohol type and deketoxime type) are allowed for use.
(E)Do not sharply bend or twist the LED strip within a small radius, otherwise the outer adhesive layer may be damaged and the internal electrical structure of LED chips may be destroyed.
(F)The bending diameter of the LED strip is recommended to be greater than 1 cm. Waterproof and moisture-proof measures shall be taken during usage.
Shenzhen Guangpuda Technology Co., Ltd. reserves the final interpretation right of these specifications. Actual products shall prevail.
GPD-COB-RGB-10mm-840D-24V-14W-CV
Product Overview
1.A total of 840 LED chips are arranged in a linear layout with integrated packaging, delivering even light color without light spots.
2.Constructed with high thermal conductivity flexible printed circuit boards; the light strip can be freely bent for easy installation.
3.LED chips are directly mounted on the FPC substrate, achieving a maximum beam angle of 180°.
4.Adopts DC 24V constant voltage design. This safe low-voltage solution brings low voltage drop, with a standard cascading length of 5 meters.
5.Pre-applied high-adhesion thermally conductive double-sided adhesive tape simplifies installation and provides stable, long-lasting adhesion.
6.The LED light source features energy saving and eco-friendly properties, and complies with RoHS environmental standards.
Precautions for Installation and Application
(A) Do not let sharp objects scratch the LED strip surface during installation. Damaged encapsulant will result in product failure.
(B) Keep the encapsulant of the luminous area away from high-temperature objects to prevent scorching and deterioration of the linear luminous performance.
(C) Use a regulated DC 24V power supply for driving. Select a power supply with matched rated power according to the total length of installed LED strips. The total power load of strips powered by one single power supply shall not exceed 80% of the power supply’s rated power.
(D) If sealant is required for installation, acid-curing silicone sealant is strictly forbidden. Acid substances will corrode the circuit board, outer silicone layer and phosphor powder. Only neutral sealants (dealcohol type and deketoxime type) are permitted for use.
(E) Do not sharply bend or twist the LED strip at a small radius, which may damage the outer rubber layer and destroy the internal electrical structure of LED chips.
(F) The bending diameter of the LED strip is recommended to be greater than 1 cm.
(G) Waterproof and moisture-proof protection must be taken during use.
Remark
Shenzhen Guangpuda Technology Co., Ltd. reserves the final right of interpretation for these specifications. Actual products shall prevail.
GPD-COB-RGB-12mm-720D-12V-12W-CV
Product Overview
1.Consists of 720 LED chips arranged in a linear layout with integrated packaging, delivering uniform light output without light spots.
2.Adopts high thermal conductivity flexible printed circuit (FPC), which supports free bending for easy installation.
3.LED chips are directly mounted on the FPC substrate, offering a wide beam angle of 180°.
4.Built with DC12V constant voltage design. This safe low-voltage solution features low voltage drop and supports a standard cascading length of 5 meters.
5.Pre-attached high-adhesion thermally conductive double-sided adhesive tape simplifies installation and ensures firm, long-term adhesion.
6.The LED light source is energy-saving and eco-friendly, in compliance with RoHS environmental regulations.
Precautions for Installation and Operation
(A) Prevent sharp objects from scratching the LED strip surface during installation. Damaged encapsulant will lead to defective products.
(B) Keep the encapsulant on the luminous area away from high-temperature objects to avoid burning the encapsulant and impairing the linear lighting effect.
(C) Drive the strip with a DC 12V regulated power supply. Select a power supply with proper rated power according to the total length of LED strips to be installed.
The total power load of LED strips driven by one power supply shall not exceed 80% of the power supply’s rated power.
(D) If glass adhesive is needed during installation, acid-cure silicone sealant is strictly forbidden. Acidic substances will corrode the circuit board, outer silicone and phosphor powder. Only neutral glass glue (dealcohol type and deketoxime type) is acceptable.
(E) Do not sharply bend or twist the LED strip, otherwise the outer adhesive layer may be damaged and the internal electrical structure of LED chips will be destroyed.
(F) The bending diameter of the LED strip in any bending condition is recommended to be larger than 1 cm.
Keep the product waterproof and moisture-proof.
Shenzhen Guangpuda Technology Co., Ltd reserves the right of final interpretation for this specification sheet.
GPD-COB-RGB-5mm-576D-5V-10W-CV
Product Overview
1.This strip adopts 576 LED chips arranged in linear layout with integrated packaging, delivering uniform light color with no uneven light spots.
2.It is designed with high thermal conductivity flexible printed circuit (FPC), allowing arbitrary bending for simple installation.
3.LED chips are directly mounted on the FPC substrate, realizing a wide beam angle up to 180°.
4.Equipped with DC 5V constant voltage design, this safe low-voltage product features low voltage drop, with a standard cascading length of 5 meters.
5.Pre-attached high-adhesion thermally conductive double-sided adhesive tape enables easy installation with firm and long-lasting bonding performance.
6.The LED light source is energy-saving and eco-friendly, complying with RoHS environmental compliance standards.
Precautions for Installation and Application
(A) Do not let sharp objects scratch the LED strip surface during installation. Damaged encapsulant will result in product failure.
(B) Keep the encapsulant of the luminous area away from high-temperature objects to prevent scorching and deterioration of the linear luminous performance.
(C) Use a regulated DC 24V power supply for driving. Select a power supply with matched rated power according to the total length of installed LED strips. The total power load of strips powered by one single power supply shall not exceed 80% of the power supply’s rated power.
(D) If sealant is required for installation, acid-curing silicone sealant is strictly forbidden. Acid substances will corrode the circuit board, outer silicone layer and phosphor powder. Only neutral sealants (dealcohol type and deketoxime type) are permitted for use.
(E) Do not sharply bend or twist the LED strip at a small radius, which may damage the outer rubber layer and destroy the internal electrical structure of LED chips.
(F) The bending diameter of the LED strip is recommended to be greater than 1 cm.
(G) Waterproof and moisture-proof protection must be taken during use.
Remark
Shenzhen Guangpuda Technology Co., Ltd. reserves the final right of interpretation for these specifications. Actual products shall prevail.