GPD-COB-10mm-360D-24V-11W-CV
Product Overview
1.Equipped with 360 linearly arranged chips with integrated packaging, delivering uniform light output with no light spots.
2.Adopts high thermal conductivity flexible circuit board, flexible for arbitrary bending and easy installation.
3.LED chips are directly mounted on the FPC substrate, achieving a wide 180° beam angle.
4.DC24V constant voltage design features safe low voltage and low voltage drop; the standard cascading length is 5 meters.
5.Lined with high-adhesion thermal conductive double-sided adhesive tape on the back for simple installation with firm and long-lasting adhesion.
6.Eco-friendly LED light source complying with RoHS environmental standards and featuring outstanding energy-saving performance.
Precautions for Product Installation & Usage
(A) Do not scratch the surface of the light strip with sharp objects during installation. Damages to the colloid will lead to product failure.
(B) Keep the colloid on the luminous area away from high-temperature objects to prevent scald deformation of the colloid and deterioration of linear lighting performance.
(C) Use a DC 24V regulated power supply for driving. Match the power supply wattage according to the total length of light strips to be installed. The total power consumption of light strips powered by a single power supply shall not exceed 80% of the rated power of the power adapter.
(D) If glass adhesive is required for installation, acid-cure silicone sealant is strictly prohibited. Acid substances will corrode the circuit board, silicone layer and phosphor powder. Only neutral glass adhesives (dealcohol type & deketoxime type) are acceptable.
(E) Sharp bending or twisting of the light strip is forbidden, which may rupture the rubber casing and destroy the internal electrical structure of LED chips.
(F) The bending diameter of the light strip shall be larger than 1 cm in any bending scenario. Keep the product waterproof and moisture-proof.
Shenzhen Guangpuda Technology Co., Ltd. reserves the final right to interpret the above specifications. Actual product shall prevail.
GPD-COB-10mm-480D-24V-14.5W-CV
Product Overview
1.480 flip-chip LED chips are arranged in a linear layout with integrated packaging, offering uniform light color with no bright spots.
2.It adopts a high thermal conductivity flexible circuit board design, which can be bent freely for easy installation.
3.LED chips are directly mounted on the FPCB, delivering a beam angle of up to 170°.
4.Designed with DC 24V constant voltage power supply, it features safe low voltage and low voltage drop, with a standard cascading length of 5 meters.
5.High-adhesion thermal conductive double-sided adhesive tape is pre-applied on the back, allowing easy installation with firm and long-lasting bonding performance.
6.The LED light source is energy-saving and eco-friendly, and complies with RoHS environmental requirements.
Notes on Product Installation and Usage
(A) During installation, prevent sharp objects from touching the surface of the LED strip to avoid damaging the encapsulating gel and causing product defects.
(B) Keep the gel at the light-emitting area away from high-temperature objects; high temperature may scorch the gel and degrade the linear lighting effect.
(C) Use a DC 24V regulated power supply for driving. Select a power supply with suitable rated power according to the quantity of LED strips to be installed. The total power of all strips powered by one power supply shall be less than 80% of the power supply’s rated power.
(D) If sealant is required during installation, acid-curing silicone sealant is strictly forbidden. (Acidic components will corrode the circuit board, silicone encapsulation and phosphor powder.) Only neutral sealant (dealcoholization type and deketoxime type) is acceptable.
(E) Do not sharply bend or twist the LED strip at a tight radius, otherwise the silicone strip may be damaged or the internal electrical structure of the LED chips may be destroyed.
(F) It is recommended that the bending diameter of the LED strip at any position be greater than 1 cm. Please keep the product protected from water and moisture.
The right of final interpretation of this specification belongs to Shenzhen Guangpuda Technology Co., Ltd.
GPD-COB-10mm-576-24V-20W（10W+10W）
Product Overview
1.Consists of 576 linearly arranged chips with integrated packaging, delivering even light output without speckles or uneven light spots.
2.Designed with high thermal conductivity flexible printed circuit board, supporting free bending for easy installation.
3.LED chips are directly mounted onto the FPC substrate, realizing a wide 180° beam angle.
4.Adopts DC24V constant voltage design with safe low voltage and low voltage drop; the standard cascading length is 5 meters.
5.Equipped with high-adhesion thermal conductive double-sided adhesive tape on the back side, enabling simple installation with stable and long-term bonding performance.
6.This LED light source features energy conservation and environmental friendliness, fully compliant with RoHS environmental directives.
Precautions for Installation and Operation
(A) Prevent sharp objects from scratching the light strip surface during installation. Colloid damage will result in product malfunction.
(B) Keep the colloid on the luminous area away from high-temperature objects to prevent colloid scorching and degradation of linear lighting performance.
(C) The light strip shall be powered by a DC 24V regulated power supply. Select a power supply with matched rated power according to the total length of light strips for installation. The total power load of light strips connected to one power supply shall not exceed 80% of the power supply’s rated power.
(D) If glass sealant is required during installation, acid-curing silicone sealant is strictly forbidden. Acidic substances will corrode circuit boards, silicone layers and phosphor powder. Only neutral glass sealants (dealcohol type and deketoxime type) are permitted for use.
(E) Sharp bending or twisting of the light strip is prohibited, as such operations may damage the adhesive layer and destroy the internal electrical structure of LED chips.
(F) The bending diameter of the light strip at any bending position must be greater than 1 cm. Please keep the product protected from water and moisture.
Shenzhen Guangpuda Technology Co., Ltd reserves the sole right of interpretation for this specification.
GPD-COB-10mm-608-24V-7W+7W
Product Overview
1.Adopts 608pcs linearly arranged chips with integrated packaging, delivering even light color with no light spots.
2.Designed with high thermal conductivity flexible circuit board, flexible for random bending and easy installation.
3.LED chips are directly mounted on the FPC substrate, achieving a wide 180° beam angle.
4.DC24V constant voltage design features safe low voltage and low voltage drop; the standard cascading length is 5 meters.
5.Equipped with high-adhesion thermal conductive double-sided adhesive tape on the backside for simple installation with firm and long-lasting adhesion.
8.LED light source is energy-saving and eco-friendly, compliant with RoHS environmental standards.
Precautions for Product Installation & Usage
(A)Do not scratch the surface of the LED strip with sharp objects during installation, which may damage the colloid and lead to product failure.
(B)Prevent the colloid on the luminous area from contacting high-temperature objects to avoid colloid scorching and deterioration of uniform linear lighting performance.
(C)Drive the product with a regulated DC 24V power supply. Select a power supply with matched rated power according to the total length of LED strips to be installed. The total power load of LED strips connected to a single power supply shall not exceed 80% of the power supply’s rated power.
(D)If glass adhesive is required for installation, acid-cure silicone sealant is strictly prohibited. Acid substances will corrode the circuit board, silicone layer and phosphor powder. Only neutral glass adhesives (alcohol-eliminating type & ketoxime-eliminating type) are acceptable.
(E)Never sharply fold or twist the LED strip, otherwise the adhesive layer and internal electrical structure of LED chips will be damaged.
(F)The bending diameter of the LED strip at any position shall be larger than 1 cm.
(G)Keep the LED strip away from water and humid environments.
Shenzhen Guangpuda Technology Co., Ltd reserves the right of final interpretation for this specification sheet.
GPD-COB-12mm-600D-24V-24W
Product Overview
1.Equipped with 600 LED chips arranged linearly with integrated packaging. It features a wide luminous surface, uniform light color and zero light spots.
2.Adopts high thermal conductivity flexible printed circuit (FPC), which can be bent freely for easy installation.
3.LED chips are directly mounted on the FPC, achieving a full 180° beam angle.
4.Designed with DC24V constant voltage. Featuring safe low voltage and low voltage drop, it supports a standard cascading length of 5 meters.
5.Pre-laminated high-adhesion thermally conductive double-sided adhesive tape enables easy installation with firm and long-lasting adhesion.
6.This LED light source is energy-saving and environmentally friendly, and complies with RoHS environmental standards.
Precautions for Product Installation & Usage
(A)Avoid contact between sharp objects and the LED strip surface during installation. Damaged encapsulant will result in product failures.
(B) Keep the encapsulant on the luminous area away from high-temperature objects to prevent scorching the encapsulant and degrading linear lighting performance.
(C) Use a DC 24V regulated power supply for driving. Select a power supply with matched rated power according to the total length of LED strips to be installed. The total power consumption of LED strips powered by a single power supply shall not exceed 80% of the power supply’s rated power.
(D) Do not sharply fold or twist the LED strip, otherwise the rubber casing may be damaged and the internal electrical structure of LED chips may be destroyed.
(E) The recommended bending diameter of the LED strip in any bending application must be greater than 1 cm.
(F) Protect the product against water and moisture intrusion.
Shenzhen Guangpuda Technology Co., Ltd. reserves the right of final interpretation for this specification sheet.
GPD-COB-30mm-1600D-24V-40W-CV
Product Overview
1.This strip adopts 1600 flip-chip LEDs arranged in a linear layout with integrated packaging, delivering uniform light output and color without visible light spots.
2.Designed with high thermal conductivity flexible circuit boards, the light strip supports free bending for easy installation.
3.LED chips are directly mounted onto the FPCB substrate, achieving a wide beam angle of up to 170°.
4.Featured with DC24V constant voltage power supply, this low-voltage solution guarantees safe usage and low voltage drop, with a standard cascading length of 5 meters.
5.Pre-attached high-adhesion thermally conductive double-sided adhesive tape facilitates quick installation and ensures firm, long-term adhesion.
6.The LED light source is energy-saving and eco-friendly, compliant with RoHS environmental directives.
Precautions for Installation and Operation
(A) Prevent sharp objects from scraping the strip surface during installation. Damaged encapsulant will lead to product malfunction.
(B) Keep the encapsulant of the luminous area away from high-temperature articles to avoid scorching the colloid and degrading the linear lighting performance.
(C) Power the strip with a regulated DC 24V power supply. Select a power supply with matching rated power according to the total length of LED strips to be installed. The total power consumption of strips driven by a single power supply shall not exceed 80% of the power supply’s rated power.
(D) If sealant is required for installation, acid-curing silicone sealant is strictly prohibited. Acid substances will corrode the circuit board, outer silicone layer and phosphor powder. Only neutral sealants (dealcohol type and deketoxime type) are permitted for use.
(E) Do not sharply bend or twist the LED strip at a small radius. Improper bending may damage the outer rubber layer and break the internal electrical structure of LED chips.
(F) The bending diameter of the LED strip must be larger than 1 cm. Waterproof and moistureproof protection should be implemented during application.
Shenzhen Guangpuda Technology Co., Ltd. reserves the right of final interpretation for this specification sheet.
GPD-COB-3mm-400D-12V-7W-CV
Product Overview
1.400 LED chips are arranged in a linear layout with integrated packaging, providing uniform light color without light spots.
2.Designed with a high thermal conductivity flexible printed circuit board, it can be bent freely for easy installation.
3.LED chips are directly mounted on the FPC, delivering a wide beam angle up to 180°.
4.Adopts DC 12V constant voltage design with safe low voltage and low voltage drop; the standard cascading length is 5 meters.
5.High-adhesion thermal conductive double-sided adhesive tape is pre-applied on the back, which simplifies installation and ensures firm, long-lasting adhesion.
6.The LED light source features energy-saving and eco-friendly performance and complies with RoHS environmental standards.
Notes on Product Installation and Usage
(A) During installation, prevent sharp objects from touching the surface of the LED strip to avoid damaging the encapsulation gel and resulting in product defects.
(B) Do not let the gel of the light-emitting area come into contact with high-temperature objects, as this may scorch the gel and affect the linear lighting effect.
(C) Use a DC 12V regulated power supply for driving. Select a power supply with appropriate power rating according to the quantity of LED strips to be installed. The total power of all strips powered by one power supply must be less than 80% of the power supply’s rated power.
(D) If sealant is needed during installation, acid-curing silicone sealant is strictly prohibited (acidic substances will corrode the circuit board, silicone encapsulation and phosphor powder). Only neutral sealant (dealcoholization type and deketoxime type) is allowed.
(E) Never sharply bend or twist the LED strip at a tight radius, otherwise the silicone strip may get damaged or the internal electrical structure of the chips may be broken.
(F) It is recommended that the bending diameter of the LED strip at any position be greater than 1 cm. Please keep the product waterproof and moisture-proof.
The right of final interpretation of this specification belongs to Shenzhen Guangpuda Technology Co., Ltd.
GPD-COB-5mm-608D-24V-6+6W
Product Overview
1.Adopts 608pcs linearly arranged chips with integrated packaging, delivering even light color with no light spots.
2.Designed with high thermal conductivity flexible circuit board, flexible for random bending and easy installation.
3.LED chips are directly mounted on the FPC substrate, achieving a wide 180° beam angle.
4.DC24V constant voltage design features safe low voltage and low voltage drop; the standard cascading length is 5 meters.
5.Equipped with high-adhesion thermal conductive double-sided adhesive tape on the backside for simple installation with firm and long-lasting adhesion.
8.LED light source is energy-saving and eco-friendly, compliant with RoHS environmental standards.
Precautions for Product Installation & Usage
(A)Do not scratch the surface of the LED strip with sharp objects during installation, which may damage the colloid and lead to product failure.
(B)Prevent the colloid on the luminous area from contacting high-temperature objects to avoid colloid scorching and deterioration of uniform linear lighting performance.
(C)Drive the product with a regulated DC 24V power supply. Select a power supply with matched rated power according to the total length of LED strips to be installed. The total power load of LED strips connected to a single power supply shall not exceed 80% of the power supply’s rated power.
(D)If glass adhesive is required for installation, acid-cure silicone sealant is strictly prohibited. Acid substances will corrode the circuit board, silicone layer and phosphor powder. Only neutral glass adhesives (alcohol-eliminating type & ketoxime-eliminating type) are acceptable.
(E)Never sharply fold or twist the LED strip, otherwise the adhesive layer and internal electrical structure of LED chips will be damaged.
(F)The bending diameter of the LED strip at any position shall be larger than 1 cm. Keep the LED strip away from water and humid environments.
Shenzhen Guangpuda Technology Co., Ltd reserves the right of final interpretation for this specification sheet.
GPD-COB-7.75mm-288D-220V-9W-CV
Product Overview
1.This strip adopts 288 flip-chip LEDs arranged in a linear layout with integrated packaging, delivering even light color with zero light spots.
2.Designed with high thermal conductivity flexible printed circuit board (FPCB), it supports free bending for effortless installation.
3.LED chips are directly mounted on the FPCB, realizing a 180° beam angle.
4.High-voltage AC220V design features plug-and-play lighting without the need for an external transformer. It boasts low voltage drop and supports a standard cascading length of 30 meters.
5.Pre-installed high-adhesion thermally conductive double-sided adhesive tape enables easy installation with stable and long-term bonding performance.
6.The LED light source is energy-saving and eco-friendly, complying with RoHS environmental requirements.
Precautions for Product Installation and Application
(A)Prevent sharp objects from scratching the LED strip surface during installation. Damaged gel coating will lead to product defects.
(B) Keep the gel on the luminous area away from high-temperature objects to prevent gel scorching and deterioration of linear lighting consistency.
(C) The product adopts AC 220V power supply. Take sufficient safety protection measures during wiring operation.
(D) If glass adhesive is required for installation, acid-curing silicone sealant is strictly prohibited. Acid substances will corrode the circuit board, outer silicone layer and phosphor powder. Only neutral glass glue (dealcohol type and deketoxime type) is permitted for use.
(E) Do not sharply bend or twist the LED strip. Improper operation may damage the rubber casing and destroy the internal electrical structure of LED chips, see attached figure.
(F) The recommended minimum bending diameter for the LED strip in any bending scenario is greater than 1cm.
Keep the product waterproof and moisture-proof.
Shenzhen Guangpuda Technology Co., Ltd. reserves the right of final interpretation for this specification sheet.
GPD-COB-8mm-320D-24V-8W-CV
Product Overview
1.320 flip-chip LEDs are arranged in a linear layout with integrated packaging, delivering uniform light color with no light spots.
2.Adopts a high thermal conductivity flexible circuit board design, which can be bent freely for easy installation.
3.LED chips are directly mounted on the FPCB, achieving a wide beam angle of up to 170°.
4.Built with DC 24V constant voltage design; the low safety voltage features small voltage drop, supporting a standard cascading length of 5 meters.
5.Pre-applied high-adhesion thermal conductive double-sided adhesive tape on the back, enabling quick installation with strong and long-lasting adhesion.
6.The LED light source is energy-saving and eco-friendly, fully compliant with RoHS environmental standards.
Notes on Product Installation & Usage
(A) During installation, prevent sharp objects from touching the surface of the LED strip, to avoid damaging the gel and causing product defects.
(B) Do not expose the gel on the light-emitting area to high-temperature objects, which may scorch the gel and impair the linear lighting performance.
(C) Use a DC 24V regulated power supply for driving. Select a power supply with appropriate power rating according to the quantity of LED strips to be installed. The total power of all strips powered by one power supply shall not exceed 80% of the power supply’s rated power.
(D) If silicone sealant is required during installation, acid-curing silicone adhesive is strictly prohibited (acid content will corrode the circuit board, silicone encapsulation and phosphor powder). Only neutral sealant (alkoxy-curing and ketoxime-curing types) is acceptable.
(E) Never sharply bend or twist the LED strip at a tight radius, as this may damage the silicone strip or destroy the internal electrical structure of the LED chips.
(F) It is recommended that the bending diameter of the LED strip at any position be greater than 1 cm. Keep the product protected from water and moisture.
The right of final interpretation of this specification belongs to Shenzhen Guangpuda Technology Co., Ltd.
GPD-COB-8mm-384-24V-10W-CV
Product Overview
1.Equipped with 384 flip-chip LEDs arranged in linear layout with integrated packaging, delivering uniform light color with no light spots.
2.Adopts high thermal conductivity flexible circuit board structure; the strip can be bent freely for easy installation.
3.LED chips are directly mounted on the FPCB, offering a wide beam angle up to 170°.
4.DC 24V constant voltage design features safe low voltage and low voltage drop, supporting a standard cascading length of 5 meters.
5.Pre-attached high-adhesion thermal conductive double-sided adhesive tape enables simple installation with firm and long-lasting adhesion.
6.Eco-friendly LED light source complies with RoHS environmental standards.
Precautions for Product Installation & Usage
(A) Do not scratch the surface of the LED strip with sharp objects during installation. Damaged gel coating will lead to product failure.
(B) Keep the luminous gel area away from high-temperature objects to prevent gel scorching and deterioration of linear lighting performance.
(C) Use a regulated DC 24V power supply for driving. Select a power supply with matched rated power according to the total length of installed strips. The total power load of LED strips driven by one power supply shall not exceed 80% of the power supply’s rated power.
(D) If glass adhesive is required for installation, acid-cure silicone sealant is strictly forbidden. Acid substances will corrode the circuit board, silicone layer and phosphor powder. Only neutral glass adhesives (dealcohol type & deketoxime type) are acceptable.
(E) Do not sharply bend or twist the LED strip in a small radius, which may damage the rubber casing and destroy the internal electrical structure of LED chips.
(F) The bending diameter of the LED strip shall be larger than 1 cm. Waterproof and moisture-proof protection is required during application.
Shenzhen Guangpuda Technology Co., Ltd reserves the right of final interpretation for this specification sheet.
GPD-COB-8mm-480D-12V-11W-CV
Product Overview
1.480 flip-chip LED chips are arranged linearly with integrated packaging, delivering uniform light output and color without light spots.
2.It adopts a high thermal conductivity flexible circuit board design, which can be bent freely for easy installation.
3.LED chips are directly mounted on the FPCB, achieving a wide beam angle of up to 180°.
4.Featuring a DC 12V constant-voltage design with safe low voltage and low voltage drop; the standard cascading length is 5 meters.
5.High-adhesion thermal conductive double-sided adhesive tape is pre-applied on the back, enabling quick installation with firm and long-lasting adhesion.
6.This LED light source is energy-saving and environmentally friendly, and complies with RoHS environmental protection standards.
Notes on Product Installation and Usage
(A) During installation, avoid touching the surface of the LED strip with sharp objects, so as not to damage the encapsulating gel and cause product failures.
(B) Prevent the gel on the light-emitting area from contacting high-temperature objects, which may scorch the gel and degrade the linear lighting performance.
(C) Use a DC 12V regulated power supply for driving. Select a power supply with proper rated power according to the quantity of LED strips to be installed. The total power of all strips powered by one power supply shall be less than 80% of the power supply’s rated power.
(D) If sealant is required for installation, acid-curing silicone sealant is strictly forbidden (acid substances will corrode the circuit board, silicone encapsulation and phosphor powder). Only neutral sealant (dealcoholization type and deketoxime type) is permitted.
(E) Do not sharply bend or twist the LED strip at a tight radius, otherwise the silicone strip may be damaged or the internal electrical structure of the LED chips may be destroyed.
(F) It is recommended that the bending diameter of the LED strip at any position shall be greater than 1 cm. Keep the product away from water and moisture.
The right of final interpretation of this specification belongs to Shenzhen Guangpuda Technology Co., Ltd.