GPD-COB-8mm-480D-220V-10W+10W-CV
Product Overview
1.Equipped with 480 flip-chip LEDs arranged in linear layout with integrated packaging, delivering uniform light output without light spots.
2.Adopts high thermal conductivity flexible circuit board, which can be bent freely for easy installation.
3.LED chips are directly mounted on the FPCB, achieving a wide beam angle of 180°.
4.Designed for AC220V high voltage input; plug-and-play operation with no external transformer required. Features low voltage drop and supports a standard cascading length up to 30 meters.
5.Pre-attached high-adhesion thermal conductive double-sided adhesive tape enables simple installation with firm and long-lasting adhesion.
6.Energy-saving and eco-friendly LED light source, fully compliant with RoHS environmental standards.
Precautions for Product Installation & Usage
(A) Do not scratch the surface of the LED strip with sharp objects during installation, otherwise the colloid will be damaged and cause product failure.
(B) Keep the luminous colloid away from high-temperature articles to prevent scald damage to the colloid and deterioration of linear lighting performance.
(C) This product works on AC 220V power supply; strictly implement electric safety protection during wiring.
(D) If glass glue is required for installation, acid-cure silicone sealant is prohibited. Acid substances will corrode the PCB, outer silicone layer and phosphor powder. Only neutral glass glue (dealcohol-type & deketoxime-type) is acceptable.
(E) Never sharply fold or twist the LED strip, which may crack the adhesive casing and damage the internal electrical structure of LED chips.
(F) The bending diameter of the LED strip shall be larger than 1 cm in any bending application.
Keep the product waterproof and moisture-proof.
Shenzhen Guangpuda Technology Co., Ltd. reserves the right of final interpretation for this specification sheet.
GPD-COB-8mm-480D-24V-11W-CV
Product Overview
1.480 flip-chip LED chips are arranged in a linear layout with integrated packaging, delivering uniform light color without light spots.
2.It adopts a high thermal conductivity flexible circuit board design, which can be bent freely for easy installation.
3.LED chips are directly mounted on the FPCB, achieving a beam angle up to 170°.
4.It features a DC 24V constant-voltage design with safe low voltage and low voltage drop; the standard cascading length is 5 meters.
5.High-adhesion thermal conductive double-sided adhesive tape is pre-applied on the back for easy installation with firm and long-lasting adhesion.
6.This LED light source is energy-saving and eco-friendly, complying with RoHS environmental standards.
Notes on Product Installation and Usage
(A)During installation, avoid sharp objects touching the surface of the LED strip, so as not to damage the encapsulation gel and cause product defects.
(B)Keep the gel of the light-emitting area away from high-temperature objects, which may scorch the gel and impair the linear lighting performance.
(C)Use a DC 24V regulated power supply for power supply. Select a power supply with proper power rating according to the quantity of LED strips to be installed. The total power consumption of all strips connected to one power supply shall not exceed 80% of the power supply’s rated power.
(D)If sealant is required during installation, acid-curing silicone sealant is strictly prohibited (acidic substances will corrode the circuit board, silicone encapsulation and phosphor powder). Only neutral sealant (dealcoholization type and deketoxime type) can be used.
(E)Do not bend or twist the LED strip sharply at a small radius, otherwise the silicone strip may be damaged or the internal electrical structure of the LED chips may be destroyed.
(F) It is recommended that the bending diameter of the LED strip at any position be greater than 1 cm. Please protect the product against water and moisture.
The right of final interpretation of this specification belongs to Shenzhen Guangpuda Technology Co., Ltd.
GPD-COB-8mm-528D-12V-13W-CV
Product Overview
1.528 chips are arranged linearly with integrated packaging, providing uniform light output with no visible light spots.
2.Adopts high thermal conductivity flexible printed circuit (FPC) board design. The strip can be bent freely for easy installation.
3.LED chips are surface-mounted directly on the FPC substrate, achieving a 180-degree beam angle.
4.DC12V constant voltage design features safe low voltage and low voltage drop, with a standard cascading length of 5 meters.
5.High-adhesion thermally conductive double-sided adhesive is attached to the backside, enabling effortless installation with firm and long-lasting adhesion.
6.This LED light source is energy-saving and eco-friendly, in compliance with RoHS environmental standards.
Precautions for Product Installation & Application
(A)Do not allow sharp objects to contact the light strip surface during installation. Damages to the encapsulant will result in product failure.
(B)Keep the encapsulant of the luminous area away from high-temperature objects to prevent scorching of the encapsulant and deterioration of linear lighting performance.
(C)Use a DC12V regulated power supply for driving. Select a power supply with appropriate rated power according to the total length of light strips to be installed. (D)The total power consumption of light strips driven by a single power supply shall not exceed 80% of the rated power of the power supply.
(E)If glass sealant is required during installation, acid-curing silicone sealant is strictly prohibited. Acidic substances will corrode the circuit board, silicone layer and phosphor powder. Only neutral glass sealants (dealcohol type and deketoxime type) are allowed for use.
(F)Sharp bending or twisting of the light strip is forbidden, which may damage the adhesive layer and destroy the internal electrical structure of LED chips.
(G)The bending diameter of the light strip at any bending position is recommended to be greater than 1 cm. Please protect the product against water penetration and moisture.
Shenzhen Guangpuda Technology Co., Ltd reserves the final right of interpretation for these specifications. The actual delivered product shall prevail.
GPD-COB-9.91mm-528D-12V-14W-CV
Product Overview
1.Equipped with 528 linearly arranged chips adopting integrated packaging technology, delivering even luminous color without light spots.
2.Designed with high thermal conductivity flexible printed circuit (FPC), the light strip supports free bending for easy field installation.
3.LED chips are directly mounted on the FPC substrate, achieving a wide 180° beam angle.
4.DC12V constant voltage design adopts safe low voltage with low voltage drop, and the standard cascading length is 5 meters.
5.High-adhesion thermally conductive double-sided adhesive is laminated on the back side, enabling convenient installation with stable and long-lasting bonding performance.
6.The LED light source features energy saving and environmental friendliness, fully compliant with RoHS environmental regulations.
Precautions for Product Installation and Usage
(A)Keep sharp objects away from the light strip surface during installation. Damages to the encapsulant will lead to product defects.
(B)Prevent the encapsulant on the luminous area from contacting high-temperature objects to avoid scorching the encapsulant and impairing the linear lighting effect.
(C)Use a DC 12V regulated power supply for power supply drive. Select a power supply with matched power rating according to the total length of light strips to be installed. The total power of light strips powered by a single power supply shall not exceed 80% of the power supply’s rated power.
(D)If glass adhesive is required for installation, acid-curing silicone sealant is strictly prohibited. Acid substances will corrode circuit boards, silicone layers and phosphor powder. Only neutral glass adhesives (dealcohol type and deketoxime type) are permitted.
(E)Acute bending or twisting of the light strip is forbidden, otherwise the rubber coating may be damaged and the internal electrical structure of chips may be destroyed.
(F)The bending diameter of the light strip at any bending position is recommended to be larger than 1 cm. Please keep the product away from water and damp environments.
Shenzhen Guangpuda Technology Co., Ltd reserves the final right of interpretation for these specifications. The actual delivered product shall prevail.
GPD-COB-RGB-10mm-576D-24V-16W-CV
Product Overview
1.Equipped with 576 LED chips arranged in linear layout and integrated packaging, featuring even light color distribution with zero light spots.
2.Adopts high thermal conductivity flexible PCB design. The light strip can be bent freely for easy installation work.
3.LED chips are surface-mounted directly on the FPC substrate, delivering a wide beam angle up to 180°.
4.Designed with DC 24V constant voltage supply. This low-voltage solution ensures safe utilization and low voltage drop, with a standard cascading length of 5 meters.
5.Pre-laminated high-adhesion thermally conductive double-sided adhesive tape simplifies installation and provides firm, long-term adhesion.
6.The LED light source is energy-saving and environmentally friendly, complying with RoHS environmental regulations.
Precautions for Installation & Operation
(A)Do not scratch the surface of the LED strip with sharp objects during installation. Damaged encapsulant will result in product failure.
(B)Keep the encapsulant on the luminous area away from high-temperature objects to prevent scorching the colloid and impairing the linear luminous effect.
(C)Use a regulated DC 24V power supply for driving. Select a power supply with appropriate rated power according to the total length of LED strips to be installed. The total power of LED strips powered by a single power supply shall not exceed 80% of the power supply’s rated power.
(D)If glass sealant is required during installation, acid-curing silicone sealant is strictly prohibited. Acid substances will corrode the circuit board, outer silica gel and phosphor powder. Only neutral glass sealants (dealcohol type and deketoxime type) are allowed for use.
(E)Do not sharply bend or twist the LED strip within a small radius, otherwise the outer adhesive layer may be damaged and the internal electrical structure of LED chips may be destroyed.
(F)The bending diameter of the LED strip is recommended to be greater than 1 cm. Waterproof and moisture-proof measures shall be taken during usage.
Shenzhen Guangpuda Technology Co., Ltd. reserves the final interpretation right of these specifications. Actual products shall prevail.
GPD-COB-RGB-10mm-840D-24V-14W-CV
Product Overview
1.A total of 840 LED chips are arranged in a linear layout with integrated packaging, delivering even light color without light spots.
2.Constructed with high thermal conductivity flexible printed circuit boards; the light strip can be freely bent for easy installation.
3.LED chips are directly mounted on the FPC substrate, achieving a maximum beam angle of 180°.
4.Adopts DC 24V constant voltage design. This safe low-voltage solution brings low voltage drop, with a standard cascading length of 5 meters.
5.Pre-applied high-adhesion thermally conductive double-sided adhesive tape simplifies installation and provides stable, long-lasting adhesion.
6.The LED light source features energy saving and eco-friendly properties, and complies with RoHS environmental standards.
Precautions for Installation and Application
(A) Do not let sharp objects scratch the LED strip surface during installation. Damaged encapsulant will result in product failure.
(B) Keep the encapsulant of the luminous area away from high-temperature objects to prevent scorching and deterioration of the linear luminous performance.
(C) Use a regulated DC 24V power supply for driving. Select a power supply with matched rated power according to the total length of installed LED strips. The total power load of strips powered by one single power supply shall not exceed 80% of the power supply’s rated power.
(D) If sealant is required for installation, acid-curing silicone sealant is strictly forbidden. Acid substances will corrode the circuit board, outer silicone layer and phosphor powder. Only neutral sealants (dealcohol type and deketoxime type) are permitted for use.
(E) Do not sharply bend or twist the LED strip at a small radius, which may damage the outer rubber layer and destroy the internal electrical structure of LED chips.
(F) The bending diameter of the LED strip is recommended to be greater than 1 cm.
(G) Waterproof and moisture-proof protection must be taken during use.
Remark
Shenzhen Guangpuda Technology Co., Ltd. reserves the final right of interpretation for these specifications. Actual products shall prevail.
GPD-COB-RGB-12mm-720D-12V-12W-CV
Product Overview
1.Consists of 720 LED chips arranged in a linear layout with integrated packaging, delivering uniform light output without light spots.
2.Adopts high thermal conductivity flexible printed circuit (FPC), which supports free bending for easy installation.
3.LED chips are directly mounted on the FPC substrate, offering a wide beam angle of 180°.
4.Built with DC12V constant voltage design. This safe low-voltage solution features low voltage drop and supports a standard cascading length of 5 meters.
5.Pre-attached high-adhesion thermally conductive double-sided adhesive tape simplifies installation and ensures firm, long-term adhesion.
6.The LED light source is energy-saving and eco-friendly, in compliance with RoHS environmental regulations.
Precautions for Installation and Operation
(A) Prevent sharp objects from scratching the LED strip surface during installation. Damaged encapsulant will lead to defective products.
(B) Keep the encapsulant on the luminous area away from high-temperature objects to avoid burning the encapsulant and impairing the linear lighting effect.
(C) Drive the strip with a DC 12V regulated power supply. Select a power supply with proper rated power according to the total length of LED strips to be installed.
The total power load of LED strips driven by one power supply shall not exceed 80% of the power supply’s rated power.
(D) If glass adhesive is needed during installation, acid-cure silicone sealant is strictly forbidden. Acidic substances will corrode the circuit board, outer silicone and phosphor powder. Only neutral glass glue (dealcohol type and deketoxime type) is acceptable.
(E) Do not sharply bend or twist the LED strip, otherwise the outer adhesive layer may be damaged and the internal electrical structure of LED chips will be destroyed.
(F) The bending diameter of the LED strip in any bending condition is recommended to be larger than 1 cm.
Keep the product waterproof and moisture-proof.
Shenzhen Guangpuda Technology Co., Ltd reserves the right of final interpretation for this specification sheet.
GPD-COB-RGB-5mm-576D-5V-10W-CV
Product Overview
1.This strip adopts 576 LED chips arranged in linear layout with integrated packaging, delivering uniform light color with no uneven light spots.
2.It is designed with high thermal conductivity flexible printed circuit (FPC), allowing arbitrary bending for simple installation.
3.LED chips are directly mounted on the FPC substrate, realizing a wide beam angle up to 180°.
4.Equipped with DC 5V constant voltage design, this safe low-voltage product features low voltage drop, with a standard cascading length of 5 meters.
5.Pre-attached high-adhesion thermally conductive double-sided adhesive tape enables easy installation with firm and long-lasting bonding performance.
6.The LED light source is energy-saving and eco-friendly, complying with RoHS environmental compliance standards.
Precautions for Installation and Application
(A) Do not let sharp objects scratch the LED strip surface during installation. Damaged encapsulant will result in product failure.
(B) Keep the encapsulant of the luminous area away from high-temperature objects to prevent scorching and deterioration of the linear luminous performance.
(C) Use a regulated DC 24V power supply for driving. Select a power supply with matched rated power according to the total length of installed LED strips. The total power load of strips powered by one single power supply shall not exceed 80% of the power supply’s rated power.
(D) If sealant is required for installation, acid-curing silicone sealant is strictly forbidden. Acid substances will corrode the circuit board, outer silicone layer and phosphor powder. Only neutral sealants (dealcohol type and deketoxime type) are permitted for use.
(E) Do not sharply bend or twist the LED strip at a small radius, which may damage the outer rubber layer and destroy the internal electrical structure of LED chips.
(F) The bending diameter of the LED strip is recommended to be greater than 1 cm.
(G) Waterproof and moisture-proof protection must be taken during use.
Remark
Shenzhen Guangpuda Technology Co., Ltd. reserves the final right of interpretation for these specifications. Actual products shall prevail.
GPD2835-120D
Product Features
1.Plug-and-play without an adapter; it can be directly connected to 110V/230V mains power supply.
2.Flexible light body, freely bendable for unrestricted installation on corners and curved surfaces.
3.Adopts double injection molding process, sturdy and reliable with high product consistency.
GPD2835-120D
Product Features
1.Plug-and-play, no adapter needed; can be directly used with 110V/230V mains electricity.
2.Flexible strip body, bendable freely, with no restrictions on corner and curved surface installation.
3.The product adopts double injection molding technology, which is firm and durable with high product consistency.
GPD2835-120D
Product Features
1.Plug-and-play without an adapter; can be directly connected to 110V/230V mains power for operation.
2.Flexible light body, bendable freely to enable unrestricted installation on corners and curved surfaces.
3.Adopts double injection molding process, sturdy and reliable with consistent product quality.
GPD2835-144D
Product Features
1.Plug-and-play without an adapter; can be directly connected to 110V/230V mains electricity for use.
2.Flexible strip body, bendable freely to allow unlimited installation on corners and curved surfaces.
3.Adopts double injection molding process, sturdy and durable.
4.Equipped with custom-molded male and female connectors for flexible connection, featuring IP65 waterproof performance.