Product Overview

1.This strip adopts 576 LED chips arranged in linear layout with integrated packaging, delivering uniform light color with no uneven light spots.

2.It is designed with high thermal conductivity flexible printed circuit (FPC), allowing arbitrary bending for simple installation.

3.LED chips are directly mounted on the FPC substrate, realizing a wide beam angle up to 180°.

4.Equipped with DC 5V constant voltage design, this safe low-voltage product features low voltage drop, with a standard cascading length of 5 meters.

5.Pre-attached high-adhesion thermally conductive double-sided adhesive tape enables easy installation with firm and long-lasting bonding performance.

6.The LED light source is energy-saving and eco-friendly, complying with RoHS environmental compliance standards.

Precautions for Installation and Application

(A) Do not let sharp objects scratch the LED strip surface during installation. Damaged encapsulant will result in product failure.

(B) Keep the encapsulant of the luminous area away from high-temperature objects to prevent scorching and deterioration of the linear luminous performance.

(C) Use a regulated DC 24V power supply for driving. Select a power supply with matched rated power according to the total length of installed LED strips. The total power load of strips powered by one single power supply shall not exceed 80% of the power supply’s rated power.

(D) If sealant is required for installation, acid-curing silicone sealant is strictly forbidden. Acid substances will corrode the circuit board, outer silicone layer and phosphor powder. Only neutral sealants (dealcohol type and deketoxime type) are permitted for use.

(E) Do not sharply bend or twist the LED strip at a small radius, which may damage the outer rubber layer and destroy the internal electrical structure of LED chips.

(F) The bending diameter of the LED strip is recommended to be greater than 1 cm.

(G) Waterproof and moisture-proof protection must be taken during use.

Remark

Shenzhen Guangpuda Technology Co., Ltd. reserves the final right of interpretation for these specifications. Actual products shall prevail.