Product Overview

1.Equipped with 296 flip-chip LED chips in linear arrangement with integrated packaging, delivering uniform light output with no light spots.

2.Adopts high thermal conductivity flexible circuit board, flexible for arbitrary bending and easy installation.

3.LED chips are directly mounted on the FPCB substrate, achieving a wide 180° beam angle.

4.High-voltage AC220V design is plug-and-play with no transformer required; low voltage drop allows cascading up to 30 meters.

5.Lined with high-adhesion thermal conductive double-sided adhesive tape on the back for simple installation with firm and long-lasting adhesion.

6.Eco-friendly LED light source complying with RoHS environmental standards and featuring outstanding energy-saving performance.

Precautions for Product Installation & Usage

(A) Do not scratch the surface of the light strip with sharp objects during installation. Damages to the colloid will lead to product failure.

(B) Keep the colloid on the luminous area away from high-temperature objects to prevent scald deformation of the colloid and deterioration of linear lighting performance.

(C) The strip is powered by AC 220V mains; take proper safety precautions when connecting the power.

(D) If glass glue is required during installation, acetoxy silicone sealant is strictly prohibited (acid corrodes the PCB, silicone and phosphor); use neutral (alcohol-based or oxime-based) glass glue instead.

(E) Short-distance bending or twisting of the strip is strictly prohibited, to avoid damaging the gel or the internal electrical structure of the chips.

(F) Recommended minimum bending diameter of the strip: >1CM; keep away from water and moisture.