Product Overview

1.Equipped with 480 flip-chip LEDs arranged in linear layout with integrated packaging, delivering uniform light output without light spots.

2.Adopts high thermal conductivity flexible circuit board, which can be bent freely for easy installation.

3.LED chips are directly mounted on the FPCB, achieving a wide beam angle of 180°.

4.Designed for AC220V high voltage input; plug-and-play operation with no external transformer required. Features low voltage drop and supports a standard cascading length up to 30 meters.

5.Pre-attached high-adhesion thermal conductive double-sided adhesive tape enables simple installation with firm and long-lasting adhesion.

6.Energy-saving and eco-friendly LED light source, fully compliant with RoHS environmental standards.

Precautions for Product Installation & Usage

(A) Do not scratch the surface of the LED strip with sharp objects during installation, otherwise the colloid will be damaged and cause product failure.

(B) Keep the luminous colloid away from high-temperature articles to prevent scald damage to the colloid and deterioration of linear lighting performance.

(C) This product works on AC 220V power supply; strictly implement electric safety protection during wiring.

(D) If glass glue is required for installation, acid-cure silicone sealant is prohibited. Acid substances will corrode the PCB, outer silicone layer and phosphor powder. Only neutral glass glue (dealcohol-type & deketoxime-type) is acceptable.

(E) Never sharply fold or twist the LED strip, which may crack the adhesive casing and damage the internal electrical structure of LED chips.

(F) The bending diameter of the LED strip shall be larger than 1 cm in any bending application.

Keep the product waterproof and moisture-proof.

Shenzhen Guangpuda Technology Co., Ltd. reserves the right of final interpretation for this specification sheet.