Product Overview

1.320 flip-chip LEDs are arranged in a linear layout with integrated packaging, delivering uniform light color with no light spots.

2.Adopts a high thermal conductivity flexible circuit board design, which can be bent freely for easy installation.

3.LED chips are directly mounted on the FPCB, achieving a wide beam angle of up to 170°.

4.Built with DC 24V constant voltage design; the low safety voltage features small voltage drop, supporting a standard cascading length of 5 meters.

5.Pre-applied high-adhesion thermal conductive double-sided adhesive tape on the back, enabling quick installation with strong and long-lasting adhesion.

6.The LED light source is energy-saving and eco-friendly, fully compliant with RoHS environmental standards.

Notes on Product Installation & Usage

(A) During installation, prevent sharp objects from touching the surface of the LED strip, to avoid damaging the gel and causing product defects.

(B) Do not expose the gel on the light-emitting area to high-temperature objects, which may scorch the gel and impair the linear lighting performance.

(C) Use a DC 24V regulated power supply for driving. Select a power supply with appropriate power rating according to the quantity of LED strips to be installed. The total power of all strips powered by one power supply shall not exceed 80% of the power supply’s rated power.

(D) If silicone sealant is required during installation, acid-curing silicone adhesive is strictly prohibited (acid content will corrode the circuit board, silicone encapsulation and phosphor powder). Only neutral sealant (alkoxy-curing and ketoxime-curing types) is acceptable.

(E) Never sharply bend or twist the LED strip at a tight radius, as this may damage the silicone strip or destroy the internal electrical structure of the LED chips.

(F) It is recommended that the bending diameter of the LED strip at any position be greater than 1 cm. Keep the product protected from water and moisture.

The right of final interpretation of this specification belongs to Shenzhen Guangpuda Technology Co., Ltd.