Product Overview

1.Equipped with 384 flip-chip LEDs arranged in linear layout with integrated packaging, delivering uniform light color with no light spots.

2.Adopts high thermal conductivity flexible circuit board structure; the strip can be bent freely for easy installation.

3.LED chips are directly mounted on the FPCB, offering a wide beam angle up to 170°.

4.DC 24V constant voltage design features safe low voltage and low voltage drop, supporting a standard cascading length of 5 meters.

5.Pre-attached high-adhesion thermal conductive double-sided adhesive tape enables simple installation with firm and long-lasting adhesion.

6.Eco-friendly LED light source complies with RoHS environmental standards.

Precautions for Product Installation & Usage

(A) Do not scratch the surface of the LED strip with sharp objects during installation. Damaged gel coating will lead to product failure.

(B) Keep the luminous gel area away from high-temperature objects to prevent gel scorching and deterioration of linear lighting performance.

(C) Use a regulated DC 24V power supply for driving. Select a power supply with matched rated power according to the total length of installed strips. The total power load of LED strips driven by one power supply shall not exceed 80% of the power supply’s rated power.

(D) If glass adhesive is required for installation, acid-cure silicone sealant is strictly forbidden. Acid substances will corrode the circuit board, silicone layer and phosphor powder. Only neutral glass adhesives (dealcohol type & deketoxime type) are acceptable.

(E) Do not sharply bend or twist the LED strip in a small radius, which may damage the rubber casing and destroy the internal electrical structure of LED chips.

(F) The bending diameter of the LED strip shall be larger than 1 cm. Waterproof and moisture-proof protection is required during application.

Shenzhen Guangpuda Technology Co., Ltd reserves the right of final interpretation for this specification sheet.